An extension personal identification number (PIN) is required to
use this feature. (® 5.1.6 Extension PIN
(Personal Identification Number))
• Storing the Call Log Information from an Extension
Depending on system programming, the information about an extension (including over a TIE connection)
logged in the incoming call log can be stored in Personal Speed Dialing.
• Incoming Call Log Memory
The total number of incoming calls that can be logged by the PBX is limited. The maximum number of calls
that can be logged in the Incoming Call Log of each extension and ICD group can be specified through
system programming. When a call log is full, the oldest call will be replaced each time a call is received.
• Automatic Caller ID Number Modification
If the PBX is programmed to automatically modify incoming telephone numbers, the modified numbers will
be logged in the Incoming Call Log.
• Call Log for Incoming Call Distribution Group Calls
If the original destination of a call is an incoming call distribution group, and the call is not answered, the
information is logged in the call log for the group. If it is answered, the information is logged in the call log
for the answering extension.
• Through system programming, it is possible to select which Incoming Call Logs record call information
when a call to an incoming call distribution group is answered by a member of the group:
– Only the Incoming Call Log of the extension that answered the call.
– Both the Incoming Call Log of the extension that answered the call and that of the incoming call
distribution group.
• Through system programming, it is possible to select which Incoming Call Logs record call information
when a call to an incoming call distribution group is answered by the overflow destination of the group:
– Only the Incoming Call Log of the overflow destination.
– Both the Incoming Call Log of the overflow destination and that of the incoming call distribution group.
• Incoming CO line calls to the ICD Group are logged in the incoming call log.
When the Incoming Call Log—Extension/TIE Call setting is enabled, the extension number of the ICD
group is logged in the incoming call log of the extension that answered the call.
PC Programming Manual References
4.18 [2-9] System Options—Option 7
→
Incoming Call Log—Busy / Intercept (when Called Party is Busy)
→ Incoming Call Log—Fwd All / Fwd Busy
→ Incoming Call Log—Call Pickup
→ Incoming Call Log—Extension/TIE Call
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD— Incoming Call
Log Memory
5.15 [3-5-3] Incoming Call Distribution Group—Miscellaneous
→ Options—Call Log to ICD Group when ICD Member Answered
→ Options—Call Log to ICD Group when Overflow Destination Answered
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 5— Incoming Call Display
→Option 6— Display Lock / SVM Lock
→Option 7— Incoming Call Log Memory
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Extension Number (for Call Log)
6.10 [4-2-1] Portable Station—Extension Settings
→Option 5— Incoming Call Display
→Option 7— Incoming Call Log Memory
6.18 [4-3] DSS Console
→ Type
Document Version 2013-05 Feature Manual 45
3.1.6 Call Log, Incoming
To Next Page
Loading...
