What to do if I cannot receive TEL calls on my Panasonic Conference Phone?
If you cannot receive TEL calls, ensure the "Line Selection" setting is set to "IP + TEL". Also, if the operation mode is set to "USB Audio", you cannot make or receive IP, TEL, PS or PC calls. Change the setting to "Peer to Peer" or "IP-PBX".
Why can't I record to the SD memory card on my Panasonic IP Phone?
If you cannot record to the SD memory card using your Panasonic IP Phone, ensure that you are using a compatible SD memory card. SDHC, miniSDHC, and microSDHC memory cards are not compatible. Format SD memory cards for use with this unit in FAT format (FAT16) using a computer. Also, make sure that the SD memory card is inserted properly by gently pushing it securely toward the back of the SD memory card slot. Finally, check if the switch on the side of the SD memory card is in the "LOCK" position; if so, remove the card, slide the switch to unlock it, and then reinsert the card.
Why can't the other party hear my voice on the Panasonic Conference Phone?
The other party might not be able to hear you because the unit is muted. If "Mute" is displayed, press the indicated button to turn off the mute feature.
Why can't I use my Panasonic Conference Phone for PS or PC calls?
If you're unable to use your Panasonic Conference Phone for PS or PC calls, first ensure that you're using the correct cable and that it's properly connected. Also, verify that the operation mode is not set to 'USB Audio'. Finally, confirm that "PS" or "PC" is displayed in the upper-right corner of the display and that the 'Line Selection' setting is set to 'IP + PS' (for PS calls) or 'IP + PC' (for PC calls).
Why does my Panasonic IP Phone return to standby mode when adding phonebook entries?
If your Panasonic IP Phone returns to standby mode while you are adding or editing phonebook entries, it is because 1 minute has passed since you last pressed a button. If you pause for over 1 minute while adding or editing phonebook entries, the unit returns to standby mode.
Why can't I receive TEL calls on my Panasonic KX-NT700 IP Phone?
If you are unable to receive TEL calls on your Panasonic IP Phone, the unit may not be set to receive TEL calls. Make sure the 'Line Selection' setting is set to 'IP + TEL'.
How to fix Panasonic Conference Phone if I cannot receive IP calls?
If you cannot receive IP calls on your Panasonic Conference Phone, ensure that the 'Operation Mode' setting is set to 'Peer to Peer' or 'IP-PBX'. The 'USB Audio' setting prevents IP calls.
What to do if my Panasonic KX-NT700 doesn't ring when I receive a call?
If your Panasonic IP Phone does not ring when you receive a call, the ringer may be turned off. To resolve this, press the designated button while a call is being received, or change the ringer volume setting.
What to do if my Panasonic KX-NT700 is not working properly?
If your Panasonic IP Phone is not performing as expected, check all cable connections to ensure they are properly connected. If the issue persists, reset the unit by disconnecting it from the AC outlet, waiting 10 seconds, and then reconnecting it. If you are using PoE, disconnect the LAN cable, wait 10 seconds, and then reconnect it.
How to fix a blank display on my Panasonic KX-NT700?
If your Panasonic IP Phone display is blank, the unit might not be receiving power. Ensure the unit is connected to the AC outlet and is receiving power. If you're using PoE (Power over Ethernet), verify that the device supplying PoE is powered on and that the LAN cable is properly connected.
General| Category | IP Phone |
|---|---|
| Protocols | SIP |
| Power over Ethernet | Yes (IEEE 802.3af) |
| Microphones | Built-in |
| Bluetooth | No |
| Operating Temperature | 0 °C to 40 °C |
| Display | LCD |
| Supported Protocols | SIP |
| Audio Codecs | G.711, G.722, G.729 |
| Power Supply | AC Adapter |
| Speakerphone | Yes |
| Headset Jack | Yes |
| Operating Humidity | 10% to 90% (non-condensing) |
To Next Page
