What to do if my Panasonic KX-NT700 doesn't ring when I receive a call?
If your Panasonic IP Phone does not ring when you receive a call, the ringer may be turned off. To resolve this, press the designated button while a call is being received, or change the ringer volume setting.
What to do if changes don't take effect on my Panasonic KX-NT700 IP Phone?
If you've changed settings on your Panasonic IP Phone and the changes do not take effect, restart the unit. The unit must be restarted before the new setting becomes effective.
What to do if the other party cannot hear my voice on my Panasonic KX-NT700?
If the other party cannot hear you, check if the unit is muted. If 'Mute' is displayed, press the designated button to turn off the mute feature. Also, make sure that nothing is obstructing the microphone on the unit or any external wired microphone connected to it. Keep objects such as hands, folders, cups, and coffee pots away from the unit and the external microphone during calls.
How to fix Panasonic Conference Phone if I cannot make TEL calls?
If you're unable to make TEL calls with your Panasonic Conference Phone, first check that "TEL" is displayed in the upper-right corner of the screen, and press the center function button to change the line if necessary. Also, verify that the 'Line Selection' setting is set to 'IP + TEL'. Ensure that the operation mode is not set to 'USB Audio'. Finally, confirm that the dial mode matches your telephone service type (tone or pulse).
How to fix Panasonic Conference Phone if I cannot receive TEL calls?
If you cannot receive TEL calls on your Panasonic Conference Phone, ensure that the 'Line Selection' setting is set to 'IP + TEL'. Also, check that the operation mode is not set to 'USB Audio', as this mode prevents TEL calls.
Why can't the other party hear my voice on the Panasonic Conference Phone?
The other party might not be able to hear you because the unit is muted. If "Mute" is displayed, press the indicated button to turn off the mute feature.
What to do if I cannot receive IP calls on my Panasonic Conference Phone?
If you cannot receive IP calls, check the "Operation Mode" setting. Change the setting to "Peer to Peer" if you want to make or receive peer to peer IP calls (i.e., calls made by specifying the called party's IP address). Change the setting to "IP-PBX" if you want to make or receive intercom and outside calls as a SIP extension of the connected PBX. When the setting is "USB Audio", you cannot make IP calls. Change the setting to "Peer to Peer" or "IP-PBX".
What to do if I cannot receive TEL calls on my Panasonic Conference Phone?
If you cannot receive TEL calls, ensure the "Line Selection" setting is set to "IP + TEL". Also, if the operation mode is set to "USB Audio", you cannot make or receive IP, TEL, PS or PC calls. Change the setting to "Peer to Peer" or "IP-PBX".
What to do if my Panasonic Conference Phone display is blank?
A blank display indicates the unit is not receiving power. Ensure the unit is connected to the AC outlet and receiving power. If using PoE, confirm that the device supplying PoE is receiving power and that the LAN cable is properly connected.
What to do if I cannot make IP calls on my Panasonic Conference Phone?
If you cannot make IP calls, consider the following: * Ensure that "IP" is shown in the upper-right corner of the display before dialing. If not, press the center function button ([F2]) to change the line. * Verify that you have entered the IP address of the other party correctly. * Check the "Operation Mode" setting. Change it to "Peer to Peer" for calls made by specifying the called party's IP address, or to "IP-PBX" for intercom and outside calls as a SIP extension of the connected PBX. Note: When set to "USB Audio", you cannot make IP calls.
General| Category | IP Phone |
|---|---|
| Protocols | SIP |
| Power over Ethernet | Yes (IEEE 802.3af) |
| Microphones | Built-in |
| Bluetooth | No |
| Operating Temperature | 0 °C to 40 °C |
| Display | LCD |
| Supported Protocols | SIP |
| Audio Codecs | G.711, G.722, G.729 |
| Power Supply | AC Adapter |
| Speakerphone | Yes |
| Headset Jack | Yes |
| Operating Humidity | 10% to 90% (non-condensing) |
To Next Page
