1.18 Proprietary Telephone (PT) Features
128 Feature Guide
User Manual References
3.1.3 Customizing the Buttons
1.18.3 LED Indication
Description
The LED of the Message/Ringer Lamp and the following buttons (Line Status Buttons and Corresponding
Extension Status Button) can indicate line status with a variety of light patterns.
Line Status Buttons: S-CO, G-CO, L-CO, INTERCOM, G-DN
Corresponding Extension Status Button: DSS
1. Light Pattern of the Message/Ringer Lamp
• Incoming call: Red flashing
• Message(s) present (no incoming call): Red on
• No message(s) present (no incoming call): Off
Time Service* Used to change or display the current time mode (day/lunch/break/
night). (→ 2.2.4 Time Service)
Answer Used to answer an incoming call. (→ 1.10.3 Headset Operation)
Release Used to disconnect the line during or after a conversation, or to
complete a Call Transfer. (→ 1.10.3 Headset Operation)
Toll Restriction Used to change the Toll Restriction (TRS) level of other extension users
temporarily. (→ 1.8.3 Dial Tone Transfer)
Time Service Switching Mode
(Automatic/Manual)*
Used to switch between Automatic Switching and Manual Switching
mode. (→ 2.2.4 Time Service)
Two-way Record Used to record a conversation into your own mailbox. (→ 1.19.2 Voice
Mail DPT (Digital) Integration)
Two-way Transfer Used to record a conversation into the mailbox of a specified extension.
(→ 1.19.2 Voice Mail DPT (Digital) Integration)
One-touch Two-way Transfer Used to record a conversation into the mailbox of a specified extension
with a one-touch operation. (→ 1.19.2 Voice Mail DPT (Digital)
Integration)
Live Call Screening (LCS) Used to monitor your own voice mailbox while a caller is leaving a
message and, if desired, intercept the call. (→ 1.19.2 Voice Mail DPT
(Digital) Integration)
Voice Mail (VM) Transfer Used to transfer a call to the mailbox of a specified extension. (→ 1.19.2
Voice Mail DPT (Digital) Integration, → 1.19.3 Voice Mail DTMF
Integration)
* One-touch Feature Setting Buttons: Pressing these buttons while on-hook changes the feature
settings. The new mode will be displayed for a preprogrammed time period.
Button Usage
To Next Page
Loading...
