1.18 Proprietary Telephone (PT) Features
126 Feature Guide
[DSS Console]
Conditions
• Certain buttons are equipped with a light to indicate the status of the corresponding line or feature.
1.18.2 Flexible Buttons
Description
Flexible buttons are customized through either system or personal programming. The following types of
flexible buttons are found on proprietary telephones (PTs), DSS Consoles, and/or portable stations (PSs):
a) Flexible CO buttons
b) Flexible Direct Station Selection (DSS) buttons
c) Programmable Feature (PF) buttons
AUTO ANS (Auto Answer/
MUTE)
Used to receive an incoming call in hands-free mode, or used to mute
the built-in microphone or handset during a conversation.
VOICE CALL
Used to monitor an intercom call automatically (a hands-free
conversation is not possible).
AUTO DIAL/STORE Used for System/Personal Speed Dialing and storing program changes.
CONF (Conference) Used to establish a multiparty conversation.
FWD/DND Used to set Call Forwarding (FWD) or Do Not Disturb (DND)
PAUSE
Used to insert a dialing pause in a stored number. Also used as the
Program button on analog proprietary telephones (APTs) which do not
have the PROGRAM button.
PF (Programmable Feature)
Used to access a preprogrammed feature with a one-touch operation.
(no default)
Button Usage
Flexible CO
Used to access a CO line or CO line group when making or receiving a
call according to the button's preprogrammed CO Line Access method.
Can also be customized as a different feature button.
Flexible DSS (Direct Station
Selection)
Used to call an extension with a one-touch operation. Each button is
programmed to correspond to an extension. DSS buttons can also be
customized as other different feature buttons.
PF (Programmable Feature)
Used to access a preprogrammed feature with a one-touch operation.
(no default)
Button Usage
To Next Page
Loading...
