Panasonic KX-TAW848 - Pulse Speed; Caller ID Detection; Pause Time

4.7 Configuration [1]
290 Feature Guide
Value Range
80 ms, 160 ms
Feature Guide References
None
Pulse Speed
Selects the speed at which pulse dials are sent to the analog CO line.
Default
Low
Value Range
Low, High
Feature Guide References
None
Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analog CO line.
Default
Enable
Value Range
Disable, Enable
Programming References
4.7.3 Slot [1-1] LCO Card Property
Feature Guide References
None
Pause Time
Specifies the length of a pause.
Default
1.5 s
Value Range
1.5 s , 2.5 s , 3.5 s , 4.5 s
Feature Guide References
None