2.2 System Configuration—Software
Feature Guide 169
2.2 System Configuration—Software
2.2.1 Class of Service (COS)
Description
Each extension is assigned a Class of Service (COS) number (→ Class of Service [602]). The following
features operate differently depending on an extension's COS.
a) Internal Call Block (→ 1.1.2.2 Internal Call Block)
b) Call Forwarding (FWD) (→ 1.3.1.2 Call Forwarding (FWD))
c) Do Not Disturb (DND) Override (→ 1.3.1.3 Do Not Disturb (DND))
d) Call Pickup (→ 1.4.1.3 Call Pickup)
e) Account Code Entry (→ 1.5.4.3 Account Code Entry)
f) External Call Block (→ 1.5.5.3 CO Line Access)
g) Executive Busy Override (→ 1.7.2 Executive Busy Override)
h) Call Monitor (→ 1.7.3 Call Monitor)
i) Toll Restriction (TRS) (→ 1.8.1 Toll Restriction (TRS))
j) Extension Dial Lock (→ 1.8.2 Extension Dial Lock)
k) Walking COS (→ 1.8.4 Walking COS)
l) CO Line Call Limitation (→ 1.10.7 CO Line Call Limitation)
m) Call Transfer (→ 1.11.1 Call Transfer)
n) Door Open (→ 1.15.2 Door Open)
o) Direct Inward System Access (DISA) (→ 1.15.6 Direct Inward System Access (DISA))
p) Wireless XDP Parallel Mode (→ 1.20.3 Wireless XDP Parallel Mode)
q) Station Message Detail Recording (SMDR) for Outgoing CO Line Call (→ 1.21.1 Station Message
Detail Recording (SMDR))
r) Time Service Switching (→ 2.2.4 Time Service)
s) Manager Features (→ 2.2.6 Manager Features)
t) PT Programming (→ 2.3.2 PT Programming)
Conditions
• Walking COS
Extension users can make a call from extensions of a less-privileged COS by using their own COS
temporarily.
User Manual References
1.2.6 Calling without Restrictions
To Next Page
Loading...
