Panasonic KX-TAW848 - Feature [6]; Speed Dialing & Caller ID-Main Table [6-1-1]

4.12 Feature [6]
524 Feature Guide
4.12 Feature [6]
4.12.1 Speed Dialing & Caller ID—Main Table [6-1-1]
The System Speed Dial Table is used to store frequently dialed numbers as well as callers that should be
automatically routed to certain extensions when they call (Calling Line Identification [CLI] distribution). The
System Speed Dialing Table is available for all extension users when making or receiving a call.
A maximum of 1000 System Speed Dialing numbers (e.g., telephone numbers, feature numbers) can be
programmed with other related parameters. Select the desired System Speed Dialing numbers from the
System Speed Dialing No. list.
Name
Specifies a name for the System Speed Dialing number. As for the available characters, refer to the
character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Default
Not stored.
Value Range
Max. 20 characters
Programming References
None
Feature Guide References
1.6.1.4 Speed Dialing—Personal/System
1.16.1 Caller ID
CO Line Access Number + Telephone Number
Specifies the telephone number (including the CO Line Access number) or feature number assigned to the
System Speed Dialing number.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash])
Programming References
None
Feature Guide References
1.6.1.4 Speed Dialing—Personal/System
1.16.1 Caller ID