Panasonic KX-TAW848 - PT Programming; Programming Instructions; Buttons and Functions

3.3 PT Programming
206 Feature Guide
3.3 PT Programming
3.3.1 Programming Instructions
Requirements
PBX settings can be customized through system programming by using a proprietary telephone (PT) with
a display, such as the KX-T7735. To access system programming, the Class of Service (COS) assigned to
the PT's extension must be programmed to allow system programming, or the PT must be connected to the
lowest numbered port on the card installed in the lowest numbered slot.
Only one system programming session can be performed at a time, i.e., only one extension user can access
system programming at a time. This includes PC programming.
For a list of characters that can be entered during system programming, see Section 3.1.3 Entering
Characters.
Buttons and Functions
Function
PREVIOUS
NEXT
STORE
END
CLEAR
SELECT
FLASH
SECRET
PROGRAM
Fixed Buttons
(Page up)
(Page down)
SP
SP
-
PHONE
FLASH/RECALL