Panasonic KX-TDA100 - Page 142

Caller ID—Caller ID Header [03]
Selects the type of the 3rd header in a Caller ID signal.
Value Range
DDN, Caller ID
Maintenance Console Location
3.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Pay Tone—Pay Tone Frequency (KX-TDA100/KX-TDA200/KX-TDA600 only)
Selects the frequency of the pay tone appropriate to your telephone company.
Value Range
12kHz, 16kHz
Maintenance Console Location
3.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.26.3 Call Charge Services
Pay Tone—Pay Tone Gain (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the signal strength of the pay tone.
Value Range
0–31 dB
Maintenance Console Location
3.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
142 PC Programming Manual
3.10 [1-1] Slot—Card Property - LCO type