Panasonic KX-TDA100

Feature Guide References
1.26.3 Call Charge Services
Pay Tone—Pay Tone Pulse - MIN (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies
the
minimum length that a received pay tone signal must be for the PBX to recognise it as a pay tone
signal.
Value Range
8 ´ n (n=1–250) ms
Maintenance Console Location
3.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.26.3 Call Charge Services
Pay Tone—Pay Tone Pulse - MAX (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the
maximum length that a received pay tone signal can be for the PBX to recognise it as a pay tone
signal.
Value Range
None, 8 ´ n (n=1–250) ms
Maintenance Console Location
3.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.26.3 Call Charge Services
Pay Tone—Pay Tone Pulse - Interval (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the maximum length of time between pay tone signals.
Value Range
8 ´ n (n=1–250) ms
PC Programming Manual 143
3.10 [1-1] Slot—Card Property - LCO type