Panasonic KX-TDA100 - Page 247

Maintenance Console Location
3.22 [1-1] Slot—Card Property - E1 type—Line Signal Setting
Programming Manual References
None
Feature Guide References
None
Bit Position for Clear Back
Selects the position of the clear-back signal control bit in a DR2 signal.
Value Range
A-bit, B-bit, A&B-bit
Maintenance Console Location
3.22 [1-1] Slot—Card Property - E1 type—Line Signal Setting
Programming Manual References
None
Feature Guide References
None
Forced Release
Enables the PBX to send a forced release signal.
Value Range
Disable, Enable
Maintenance Console Location
3.22 [1-1] Slot—Card Property - E1 type—Line Signal Setting
Programming Manual References
None
Feature Guide References
None
PC Programming Manual 247
3.22 [1-1] Slot—Card Property - E1 type—Line Signal Setting