Panasonic KX-TDA100

Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Guide References
1.21.1.6 Call Hold (HOLD)
—by ISDN
COLR Set / Cancel
Specifies the feature number used to set or cancel COLR, which suppresses the presentation of the called
party’s number to the caller.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
Programming Manual References
3.14 [1-1] Slot—Port Property - BRI Port—Supplementary Service— COLP, CLIR, COLR, CNIP, CONP,
CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary
Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E,
3PTY
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
1.30.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)
—by QSIG
CLIR Set / Cancel
Specifies the feature number used to set or cancel CLIR, which suppresses the presentation of the caller’s
number to the called party.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
PC Programming Manual 403
4.8 [2-6-1] Numbering Plan—Main