Programming Manual References
None
Feature Guide References
1.4.1.3 Call Pickup
DSS Key—Automatic Transfer for Extension Call
Specifies whether
pressing a DSS or SDN button during an extension-to-extension call disconnects the current
call or places the call on consultation hold.
Value Range
Disable: The PBX disconnects the current call, and calls the extension assigned to the DSS or SDN button.
Enable: The PBX places the current call on consultation hold.
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.12.1 Call Transfer
Transfer—Transfer to busy Extension without BSS Operation
Enables a transferred call to be queued when the transfer destination is busy.
Value Range
Disable: The
call is not transferred. (If the transfer destination has enabled the call waiting notification feature,
it is possible to inform the destination about the call transfer.)
Enable: The transferred call is queued for the time period specified in
Recall—Transfer Recall
in 4.4 [2-3]
Timers & Counters.
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
4.4 [2-3] Timers & Counters—
Recall—Transfer Recall
Feature Guide References
1.2.2.4 Queuing Feature
1.12.1 Call Transfer
466 PC Programming Manual
4.17 [2-9] System Options
To Next Page
Loading...
