Panasonic KX-TDA100 - Page 478

Value Range
10 ´ n (n=3–40) bits
Maintenance Console Location
4.18 [2-10] Extension CID Settings
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Mark Signal Bits
Specifies the number of mark bits to send when sending Caller ID information to an SLT.
Value Range
10 ´ n (n=3–40) bits
Maintenance Console Location
4.18 [2-10] Extension CID Settings
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Channel Seizure Wait Time
Specifies the
length of time that the PBX waits before starting to send the seizure signal following the first ring
when sending Caller ID information to an SLT.
Value Range
64 ´ n (n=5–35) ms
Maintenance Console Location
4.18 [2-10] Extension CID Settings
Programming Manual References
None
478 PC Programming Manual
4.18 [2-10] Extension CID Settings