Panasonic KX-TDA100 - Page 479

Feature Guide References
1.18.1 Caller ID
Caller ID Signal Type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the type of signal modulation to be used when sending Caller ID information to an SLT (reference
only).
Value Range
FSK
Maintenance Console Location
4.18 [2-10] Extension CID Settings
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Additional Local Trunk Access Code to Extension Caller ID
Enables the
PBX to automatically add a Trunk Access number to the received telephone number when sending
the Caller ID number of an incoming trunk call to an SLT.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-10] Extension CID Settings
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Send Caller ID Date & Time to Extension
Enables the
PBX to send the date and time of an incoming call when sending Caller ID information to an SLT.
Value Range
Disable, Enable
PC Programming Manual 479
4.18 [2-10] Extension CID Settings