Panasonic KX-TDA100

Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the PS belongs to are logged in to or logged out from.
Value Range
None: The incoming call distribution group is selected manually.
All: All incoming call distribution groups that the PS belongs to.
Incoming Group: A pre-specified incoming call distribution group
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Guide References
1.2.2.7 Log-in/Log-out
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Value Range
All (Day/Night/Lunch/Break),
Day/Night/Break, Day/Night/Lunch
, Day/Night
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Guide References
2.2.4 Time Service
Parameter Selection (for TRS Level Change)
Specifies the TRS/Barring level to be used temporarily on a certain PS.
Value Range
1–7
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
PC Programming Manual 691
6.13 [4-2-3] Portable Station—Flexible Button