Panasonic KX-TDA100 - Page 692

Programming Manual References
None
Feature Guide References
1.9.1 Toll Restriction (TRS)/Call Barring (Barring)
1.9.4 Dial Tone Transfer
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the Time Service Switching Mode
is set to Automatic.
Value Range
1–8
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Guide References
2.2.4 Time Service
Parameter Selection (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the delayed ringing setting for calls arriving at an SDN button.
The value specified here is only used when System Wireless—SDN Delayed Ringing with LCD
(KX-TDA100/KX-TDA200/KX-TDA600 only) on
4.17 [2-9] System Options is set to "Enable".
Value Range
Immediate, 1 Ring, 2 Rings, 3 Rings, 4 Rings, 5 Rings, 6 Rings, No Ring
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
Programming Manual References
4.17 [2-9] System Options—Option 4—
System Wireless—SDN Delayed Ringing with LCD (KX-TDA100/
KX-TDA200/KX-TDA600 only)
Feature Guide References
1.7.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension
692 PC Programming Manual
6.13 [4-2-3] Portable Station—Flexible Button