Panasonic KX-TDA100D

1.13.4 Music on Hold
Description
Music can be played to a party that has been put on hold. The following music sources are available:
a. Internal music source
b. External music source
c. Cyclic tone
Music Source Assignment
BGM1, BGM2, and cyclic tone can be selected as Music on Hold through system programming. External music
port 1 is assigned to BGM 1. It is possible to select whether external music port 2, internal music source 1, or
internal music source 2 is assigned to BGM2.
Having two external music ports, for example, allows the use of the BGM feature (® 1.17.4 Background Music
(BGM)), while assigning a separate external music source (e.g., company message, advertisement) to Music
on Hold.
[BGM Number and the Music Source]
BGM No.
Music Source
1
External music port 1
2
External music port 2, internal music source 1, or internal music
source 2
Separate music sources can be assigned for the Music on Hold and the BGM features.
Conditions
• Hardware Requirement: User-supplied music source (when an external music source is assigned)
• Volume Control
It is possible to change the volume of an internal and/or external music source.
• Each tenant can select a music source to use for Music on Hold. The type of call determines which
tenant’s music source is used, as follows:
Type
Music Source
Incoming Intercom Calls/Outgoing
Calls
Selected based on the tenant setting to which the
extension user belongs.
Incoming Trunk Calls
Selected based on the tenant setting of the distribution
method (DIL/DID/DDI/MSN).
Installation Manual References
2.9.1 Connection of Peripherals
PC Programming Manual References
4.3 [2-2] Operator & BGM
→ BGM and Music on Hold—Music Source of BGM2
→ BGM and Music on Hold—Music on Hold
4.19 [2-11-1] Audio Gain—Paging/MOH
→ MOH—MOH 1 (Music On Hold 1)
→ MOH—MOH 2 (Music On Hold 2)
172 Feature Guide
1.13.4 Music on Hold