1.28.3 Walking Extension
Description
It is possible to use any extension and have your extension settings available to you. Settings such as extension
number, one-touch dialling memory, and COS are all available to you at the new location. This feature is also
known as Walking Station.
[Example] This feature is useful when:
• Moving location
• There is no specific desk for your use.
Conditions
• This feature allows extension settings to be switched between PTs (including IP-PTs) and SLTs. Moving
between tenants is also possible.
• Incoming calls to your extension will also reach you at your new location.
• An extension personal identification number (PIN) is required to use this feature. (® 1.28.1 Extension
Personal Identification Number (PIN))
• If a DSS Console is connected to a PT and the DSS Console is continuously used with the PT after Walking
Extension has been activated, the new extension number of the PT must be assigned as the paired
extension through system programming.
• If PC programming is being performed for extensions whose extension settings are being transferred by
the Walking Extension feature, the Walking Extension feature may not work properly (® 2.3.1 PC
Programming).
• If this feature is performed using an extension with a Bluetooth wireless headset connected, the Bluetooth
device cannot be used with the new extension. To use the Bluetooth wireless headset, register it to the
new extension.
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main—Features—
Walking Extension
6.1 [4-1-1] Wired Extension—Extension Settings—Main— Extension PIN
6.17 [4-3] DSS Console— Pair Extension
PT Programming Manual References
[007] DSS Console Paired Telephone
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
User Manual References
1.12.1 Using the Same Settings as Your Previous Extension (Walking Extension)
Feature Guide 305
1.28.3 Walking Extension
To Next Page
Loading...
