2.3.7 Floating Extension
Description
Virtual extension numbers can be assigned to resources to make them appear as extensions. This feature is
also known as Floating Station.
These numbers are defined as floating extension numbers and can be assigned as a destination of incoming
calls etc.
Resource
Description Default
Device External Pager Used as the destination for TAFAS feature.
(® 1.17.3 Trunk Answer From Any Station
(TAFAS))
600
Outgoing Message
(OGM)
Used to send messages for DISA feature.
(® 1.17.6 Direct Inward System Access
(DISA))
5 + two-digit
OGM number
Built-in Simplified
Voice Message
(SVM)
Used to access message boxes associated
with extensions. (® 1.17.8 Built-in Simplified
Voice Message (SVM))
SVM card 1:
591
SVM card 2:
592
Analogue Remote
Maintenance
Used to access the PC programming mode
through a modem on a PC.
599
ISDN Remote
Maintenance
Used to access the PC programming mode
through the ISDN interface on a PC.
699
Group Incoming Call
Distribution Group
Used to call an incoming call distribution
group. (® 1.2.2.1 Incoming Call Distribution
Group Features—SUMMARY)
6 + two-digit
group
number
PS Ring Group
Used to call a PS ring group. (® 1.25.2 PS
Ring Group)
—
VM (DPT) Group Used to call a VM (DPT) group. 500 (VM
[DPT] Group
1)
VM (DTMF) Group Used to call a VM (DTMF) group.
—
Conditions
• It is possible to give names to floating extension numbers.
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main—Extension
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Main
→ Floating Extension Number
→ Group Name
5.20 [3-7-2] VM(DPT) Group—Unit Settings— Floating Extension No.
5.23 [3-8-2] VM(DTMF) Group—Group Settings— Floating Ext. No.
5.25 [3-9] PS Ring Group— Floating Extension Number
7.2 [5-2] External Pager— Page Number 1, Page Number 2—Floating Extension Number
7.4 [5-3-2] Voice Message—DISA Message— Floating Extension Number
402 Feature Guide
2.3.7 Floating Extension
To Next Page
Loading...
