1.26.2 Printing Message
Description
An extension user can select a message to be output on SMDR. Up to eight messages can be preprogrammed
in the Printing Message table, and are available to all extensions connected to the PBX. A message can contain
the "%" symbol, which requires a number to be entered in its place when the message is selected at an
extension.
Depending on the content of the preprogrammed messages, this feature can be used to record a variety of
information, which can be output on SMDR to, for example, a connected PC.
[Example]
If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign in
by selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A connected
PC can then be used to generate employee work records.
Conditions
• Up to seven "%"s can be stored for each message.
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main—Features— Printing Message
8.2 [6-2] Hotel & Charge—Main— SMDR for External Hotel Application 2—Printing Message 1–8
Feature Guide References
1.26.1 Station Message Detail Recording (SMDR)
3.1 Capacity of System Resources
User Manual References
1.11.1 Using the Telephones in a Hotel-type Environment (Hospitality Features)
292 Feature Guide
1.26.2 Printing Message
To Next Page
Loading...
