Panasonic KX-TDA100D

1.29.2 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone
to extension users.
Type Description
Tone 1
a. Sent when the setting is accepted.
b. Sent when a call is received in voice-calling mode
(Alternate Receiving—Ring/Voice). The caller’s
voice will be heard after the tone.
Tone 2
a. Sent from an external paging device or an extension
before being paged.
b. Sent when a call is received in Hands-free
Answerback mode.
Tone 3-1
a. Sent before a conversation is established when
using the Paging feature.
b. Sent when a conversation is established with the
extension in the following modes after the call
making operation:
• Hands-free Answerback mode
• Voice-calling mode (Alternate Receiving—Ring/
Voice)
c. Sent when making a call to or from a doorphone.
Tone 3-2 Sent just before a conversation is established when
accessing the following features by the feature numbers:
• Call Park Retrieve
• Call Pickup
• Hold Retrieve
• Paging Answer
• TAFAS
Tone 4-1 Sent when moving from a two-party call to a three-party
call. (e.g., Executive Busy Override, Conference,
Privacy Release, Two-way Record.)
Tone 4-2 Sent when moving from a three-party call to a two-party
call. (e.g., Executive Busy Override, Conference,
Privacy Release, Two-way Record.)
Tone 5 Sent when a call is placed on hold (including
Consultation Hold).
Conditions
• Confirmation Tone Patterns
All confirmation tone patterns have a default (® 3.2.1 Tones/Ring Tones).
• It is possible to eliminate each tone.
Feature Guide 309
1.29.2 Confirmation Tone