1.5.2 Automatic Extension Release
Description
After going off-hook, if an extension user fails to dial any digits within a preprogrammed time period, the user
will hear a reorder tone. This operation applies to intercom calls only. This feature is also known as Automatic
Station Release.
Conditions
• A PT/PS user hears a reorder tone for a preprogrammed time period, and then the PT/PS returns to idle
status automatically. However, an SLT user hears a reorder tone until he goes on-hook.
• This feature works in one of the following cases:
When making an intercom call
a. If the first digit is not dialled within a preprogrammed time period.
b. After a digit is dialled, if subsequent digits are not dialled within a preprogrammed time period.
PC Programming Manual References
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→ Dial—Extension First Digit
→ Dial—Extension Inter-digit
→ Tone Length—Reorder Tone for PT Handset
→ Tone Length—Reorder Tone for PT Hands-free
Feature Guide 83
1.5.2 Automatic Extension Release
To Next Page
Loading...
