When storing the number and name into Personal Speed Dialling from the call log information, the Idle
Line Access number is automatically attached to the telephone number.
• Incoming Call Log Memory
The total memory for the Incoming Call Log is determined in the PBX. The maximum number that can be
logged for each extension and incoming call distribution group is also determined through system
programming. If the memory becomes full, the new call record overwrites the oldest one.
• Call Log for Incoming Call Distribution Group Calls
If the original destination of a call is an incoming call distribution group, and the call is not answered, the
information is logged in the call log for the group. If it is answered, the information is logged in the call log
for the answering extension.
Through system programming, it is possible to select which Incoming Call Logs record call information
when a member of an incoming call distribution group answers a call to the group:
– Only the Incoming Call Log of the extension that answered the call.
– Both the Incoming Call Log of the extension that answered the call and that of the incoming call
distribution group.
PC Programming Manual References
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD— Incoming Call
Log Memory
5.16 [3-5-3] Incoming Call Distribution Group—Miscellaneous— Options—Call Log to ICD Group for
Answered Call
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 5— Incoming Call Display
→Option 6— Display Lock / SVM Lock
→Option 7— Incoming Call Log Memory
6.5 [4-1-4] Wired Extension—Flexible Button— Type
6.10 [4-2-1] Portable Station—Extension Settings
→Option 5— Incoming Call Display
→Option 7— Incoming Call Log Memory
6.17 [4-3] DSS Console— Type
Feature Guide References
1.6.1.5 Speed Dialling—Personal/System
1.20.2 Flexible Buttons
3.1 Capacity of System Resources
User Manual References
1.13.1 Using the Call Log
3.1.2 Settings on the Programming Mode
216 Feature Guide
1.18.2 Incoming Call Log
To Next Page
Loading...
