Panasonic KX-TDA100D

Pattern 11
Pattern 12
ON
OFF
ON
OFF
t=1.28 s
10.24 s 10.24 s 20.48 s
t
t=1.28 s
10.24 s 10.24 s 20.48 s
t
• It is possible to set Message Waiting while hearing a ringback tone, busy tone, or DND tone.
• Messages are always left on the original destination extension, regardless of that extension’s FWD settings.
• Both the extension that sent and received a message waiting notification can cancel the left message.
• If the extension that received a notification calls back the extension that sent the notification, and the call
is answered, the notification will be cleared automatically. However, if a voice message has been left on
the VPS, whether the notification is cleared or not depends on the VPS settings.
PC Programming Manual References
3.3 [1-1] Slot—Card Property - Extension Type— SLT Power Supply
4.8 [2-6-1] Numbering Plan—Main—Features— Message Waiting Set / Cancel / Call Back
4.10 [2-6-3] Numbering Plan—B/NA DND Call Feature— Message Waiting Set
4.17 [2-9] System Options
→Option 3— Dial Tone—Distinctive Dial Tone
→Option 5— SLT—Message Waiting Lamp Pattern
5.22 [3-8-1] VM(DTMF) Group—System Settings— VM DTMF Command—Listening Message
6.1 [4-1-1] Wired Extension—Extension Settings—Option 8— SLT MW Mode
6.5 [4-1-4] Wired Extension—Flexible Button— Type
6.13 [4-2-3] Portable Station—Flexible Button— Type
6.17 [4-3] DSS Console— Type
Feature Guide References
1.20.2 Flexible Buttons
3.1 Capacity of System Resources
User Manual References
1.2.4 When the Dialled Line is Busy or There is No Answer
1.10.5 If a Voice Processing System is Connected
Feature Guide 219
1.19.1 Message Waiting