EasyManua.ls Logo

Panasonic KX-TDA100D

Panasonic KX-TDA100D
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Conditions
The availability of this feature is dependent on the contract with the telephone company.
CLIP/COLP features comply with the following European Telecommunication Standard (ETS)
specifications:
ETS 300 092 Calling Line Identification Presentation (CLIP) supplementary service.
ETS 300 097 Connected Line Identification Presentation (COLP) supplementary service.
CLIR/COLR features comply with the following European Telecommunication Standard (ETS)
specifications:
ETS 300 093 Calling Line Identification Restriction (CLIR) supplementary service.
ETS 300 098 Connected Line Identification Restriction (COLR) supplementary service.
The CLIP/COLP number for the connected ISDN port can be used for the ISDN terminal devices which
cannot be assigned their own CLIP/COLP number, such as a doorphone.
COLP/CLIR/COLR Assignment for Each Port
Each service can be enabled or disabled on each ISDN port of the PBX.
CLIR Button and COLR Button
It is possible to switch between CLIP and CLIR by pressing the CLIR button, and COLP and COLR by
pressing the COLR button. A flexible button can be customised as the CLIR or COLR button.
The CLIP/COLP number must match the telephone number provided by the telephone company.
Otherwise it will be ignored or replaced by another number.
When using a private network, the extension number assigned for each extension through system
programming is sent for CLIP/COLP. (® 1.30.4.2 Calling/Connected Line Identification Presentation
(CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG)
PC Programming Manual References
3.13 [1-1] Slot—Port Property - BRI Port
→ISDN CO— Subscriber Number
→Supplementary Service— COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
CCBS, AOC-D, AOC-E, 3PTY
3.15 [1-1] Slot—Port Property - PRI Port
→CO Setting— Subscriber Number
→Supplementary Service— COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
CCBS, AOC-D, AOC-E, 3PTY
3.18 [1-1] Slot—Port Property - T1 Port— Subscriber Number
3.24 [1-1] Slot—Port Property - E1 Port— Subscriber Number
4.8 [2-6-1] Numbering Plan—Main—Features
COLR Set / Cancel
CLIR Set / Cancel
Switch CLIP of CO Line / Extension
4.17 [2-9] System Options—Option 4— Send CLIP of CO Caller to ISDN—when Transfer (CLIP of Held
Party)
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Main— CLIP on ICD Group Button
6.1 [4-1-1] Wired Extension—Extension Settings
→Main— Extension Number
→ISDN CLIP— CLIP ID
→ISDN CLIP— CLIP on Extension/CO
→ISDN CLIP— CLIR
→ISDN CLIP— COLR
6.5 [4-1-4] Wired Extension—Flexible Button— Type
6.10 [4-2-1] Portable Station—Extension Settings
→ISDN CLIP— CLIP ID
→ISDN CLIP— CLIP on Extension/CO
238 Feature Guide
1.21.1 Integrated Services Digital Network (ISDN)

Table of Contents

Other manuals for Panasonic KX-TDA100D

Related product manuals