Feature Description & Reference
Automatic Fax Transfer A virtual PS can be used to forward fax calls to a fax machine at
another PBX connected by TIE line.
® 1.17.7 Automatic Fax Transfer
Built-in Simplified Voice
Message
Registering a virtual PS as the first extension of an ICD Group
provides the ICD Group with a dedicated message box that is not
shared with an actual extension.
® 1.17.8 Built-in Simplified Voice Message (SVM)
Conditions
• To use this feature, call forwarding to trunks must be enabled through COS programming.
PC Programming Manual References
3.42 [1-2] Portable Station
PT Programming Manual References
[690] PS Registration
Feature Guide References
1.3.1.2 Call Forwarding (FWD)
Feature Guide 283
1.25.6 Virtual PS
To Next Page
Loading...
