a. Tenant 1 (COS 1 and COS 2) can make calls to both Tenant 2 (COS 3 and COS 4) and Tenant 3
(COS 5 and COS 6) as well as Tenant 1.
b. Tenant 2 (COS 3 and COS 4) can make calls to Tenant 1 (COS 1 and COS 2) and Tenant 2.
c. Tenant 3 (COS 5 and COS 6) can make calls to Tenant 3 itself only.
• An incoming call distribution group must belong to one tenant because the following features are
determined on a tenant basis (® 1.2.2.1 Incoming Call Distribution Group Features—SUMMARY):
– Music on Hold while a call is waiting in the queue
– The Time Table which determines the overflow destination.
PC Programming Manual References
4.3 [2-2] Operator & BGM
→
PBX Operator—Day, Lunch, Break, Night
→ BGM and Music on Hold—Music on Hold
4.5 [2-4] Week Table
4.7 [2-5] Holiday Table
4.13 [2-7-3] Class of Service—Internal Call Block
5.7 [3-2] User Group
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Main— Tenant Number
6.1 [4-1-1] Wired Extension—Extension Settings—Main— User Group
6.10 [4-2-1] Portable Station—Extension Settings—Main—
User Group
7.1 [5-1] Doorphone— Tenant Number
7.7 [5-5] External Sensor— Tenant No.
8.1 [6-1] System Speed Dial
8.6 [6-6] Tenant
Section 10 [8] ARS
10.6 [8-5] Carrier—Authorisation Code for Tenant
12.2 [10-2] DIL Table & Port Settings—DIL— Tenant Number
12.3 [10-3] DDI / DID Table— Tenant Number
12.6 [10-4] MSN Table—MSN— Tenant Number
PT Programming Manual References
[001] System Speed Dialling Number
[006] Operator Assignment
[320] ARS Mode
[711] Music on Hold
Feature Guide References
3.1 Capacity of System Resources
378 Feature Guide
2.2.3 Tenant Service
To Next Page
Loading...
