1.6 Memory Dialling Features
Feature Guide 107
2. Valid Input
[Secret Dialling Example]
When storing the number "9-123-456-7890" and concealing the telephone number "123-456-7890",
Notes
• It is possible to store a Memory Dialling feature number at the beginning of the Memory
Dialling numbers.
• It is possible to store several feature numbers in one Memory Dialling location.
Conditions
• Trunk Access by Memory Dialling
A specific Trunk Access number can be stored with the telephone number in Memory Dialling. However,
Hot Line • Personal Programming
• Personal Operation with the Feature Number
• System Programming
(PC Programming only)
→ 1.6.1.7 Hot Line
Incoming Call Log Incoming call information is automatically stored.
→ 1.18.2 Incoming Call Log
Input Display while Entering Description
0–9/ /# 0–9/ /# Store the digits and #.
PAUSE (Pause) P Store a pause by pressing the PAUSE button. (→
1.5.4.7 Pause Insertion)
FLASH/RECALL
(Hooking)*
F Store a flash/recall signal (EFA mode) by pressing
the FLASH/RECALL button at the beginning of the
number. (→ 1.11.7 External Feature Access (EFA))
INTERCOM (Secret)* [ ] Conceal all or part of the number by pressing the
INTERCOM button at the beginning and at the end
of the number to be concealed. It is programmable
whether the concealed part will appear on SMDR.
TRANSFER (Transfer)* T Store a transfer command by pressing the
TRANSFER button at the beginning of the number
(used only for a One-touch Dialling). (→ 1.12.1 Call
Transfer)
[Example] Storing "T + 305"= Transferring a call to
extension 305.
*: Available only when in system/personal programming mode
Feature Storing Method & Reference
Enter .INTERCOM9 1 2 3 4 5 6 7 8 9 0 INTERCOM
To Next Page
Loading...
