Panasonic KX-TDA30

1.19 Message Features
236 Feature Guide
1.19.2 Absent Message
Description
An extension user can set or select a message (e.g., the reason for absence) to be displayed on his
telephone. When a display PT user calls the extension, the message is shown on the caller's telephone.
The following messages can be programmed as desired:
Note
The "%" means a parameter to be entered when assigning a message at an individual extension.
Up to seven "%"s can be stored for each message.
Conditions
• An extension user can select only one message at a time. The selected message is displayed at the
extension while on-hook.
Programming Manual References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Features—Absent Message Set / Cancel
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 3—Absent Message
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 3—Absent Message
2.12.5 [6-5] Absent Message
PT Programming Manual
[008] Absent Message
Type
Message
No.
Message (Example) Description
System
message
1 Will Return Soon Messages may be edited through
system programming. They are used
for every extension user commonly.
2 Gone Home
3 At Ext %%%% (Extension
Number)
4 Back at %%:%% (Hour:Minute)
5 Out until %%/%% (Month/Day)
6 In a Meeting
7
8
Personal
message
9 A message is programmable at each
extension through personal
programming (Personal Absent
Message), which can only be used by
that extension user.