Panasonic KX-TDA30

1.29 Audible Tone Features
Feature Guide 331
1.29.2 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation
tone to extension users.
Conditions
• Confirmation Tone Patterns
All confirmation tone patterns have a default (→ 3.3.1 Tones/Ring Tones).
• It is possible to eliminate each tone.
Programming Manual References
PC Programming Manual
Type Description
Tone 1
a) Sent when the setting is accepted.
b) Sent when a call is received in voice-calling mode (Alternate
Receiving—Ring/Voice). The caller's voice will be heard after the
tone.
Tone 2
a) Sent from an external paging device or an extension before being
paged.
b) Sent when a call is received in Hands-free Answerback mode.
Tone 3-1
a) Sent before a conversation is established when using the Paging
feature.
b) Sent when a conversation is established with the extension in the
following modes after the call making operation:
• Hands-free Answerback mode
• Voice-calling mode (Alternate Receiving—Ring/Voice)
c) Sent when making a call to or from a doorphone.
Tone 3-2 Sent just before a conversation is established when accessing the
following features by the feature numbers:
•Call Park Retrieve
• Call Pickup
• Hold Retrieve
• Paging Answer
•TAFAS
Tone 4-1 Sent when moving from a two-party call to a three-party call. (e.g.,
Executive Busy Override, Conference, Privacy Release, Two-way
Record.)
Tone 4-2 Sent when moving from a three-party call to a two-party call. (e.g.,
Executive Busy Override, Conference, Privacy Release, Two-way
Record.)
Tone 5 Sent when a call is placed on hold (including Consultation Hold).