Panasonic KX-TDA30

2.3 System Data Control
432 Feature Guide
2.3.8 Software Upgrading
Description
It is possible to upload software from a PC to the PBX to upgrade the following:
Conditions
• The software version of the EMPR or MPR can be confirmed through system programming.
Installation Manual References
KX-TDA100/KX-TDA200
2.3.1 MPR Card
KX-TDA600
2.3.1 EMPR Card
Programming Manual References
PC Programming Manual
2.7.3 [1-1] Slot—MPR Card Property—Memory Version:
PT Programming Manual
[190] Main Processing (MPR) Software Version Reference
Data File Storage Area
Main Processing (EMPR/MPR) software
data
Operating system data area on either the EMPR card of the
KX-TDA600, the MPR card of the KX-TDA100/KX-TDA200,
or the Main Board of the KX-TDA30.
Default data of system programming for
each country/area
Country/area data area on the EMPR card, MPR card, or
Main Board
Language data for PT display Each language data area on the EMPR card, MPR card, or
Main Board.
There are two types:
Type 1: PT display except for PT system programming (→
2.3.2 PT Programming) (5 languages max.)
Type 2: PT system programming data (one language max.)
LPR (software on a slot card) software data
(KX-TDA100/KX-TDA200/KX-TDA600 only)
Flash ROM on the slot card (e.g., BRI8)
Cell Station (CS) software data Flash ROM on the CS