Panasonic KX-TDA30

2.3 System Data Control
430 Feature Guide
2.3.7 Floating Extension
Description
Virtual extension numbers can be assigned to resources to make them appear as extensions.
These numbers are defined as floating extension numbers and can be assigned as a destination of
incoming calls etc.
This feature is also known as Floating Station.
Conditions
• It is possible to give names to floating extension numbers.
Programming Manual References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Extension
2.9.10 [3-5-1] Incoming Call Distribution Group—Group Settings—Main
→ Floating Extension Number
→ Group Name
2.9.17 [3-7-2] VM(DPT) Group—Unit Settings—Floating Extension No.
2.9.20 [3-8-2] VM(DTMF) Group—Group Settings—Floating Ext. No.
2.9.22 [3-9] PS Ring Group—Floating Extension Number
Resource Description Default
Device External Pager Used as the destination for TAFAS feature. (→
1.17.3 Trunk Answer From Any Station (TAFAS))
600
Outgoing Message
(OGM)
Used to send messages for DISA feature. (→
1.17.6 Direct Inward System Access (DISA))
5 + two-digit
OGM number
Built-in Simplified
Voice Message
(SVM) (KX-TDA30
only)
Used to access message boxes associated with
extensions. (→ 1.17.8 Built-in Simplified Voice
Message (SVM))
SVM card 1:
591
SVM card 2:
592
Analogue Remote
Maintenance
Used to access the PC programming mode
through a modem on a PC.
599
ISDN Remote
Maintenance
Used to access the PC programming mode
through the ISDN interface on a PC.
699
Group Incoming Call
Distribution Group
Used to call an incoming call distribution group. (→
1.2.2.1 Incoming Call Distribution Group
Features—SUMMARY)
6 + two-digit
group number
PS Ring Group Used to call a PS ring group. (→ 1.25.2 PS Ring
Group)
—
VM (DPT) Group Used to call a VM (DPT) group. 500 (VM [DPT]
Group 1)
VM (DTMF) Group Used to call a VM (DTMF) group. —