1.28 Extension Controlling Features
324 Feature Guide
1.28.2 Extension Feature Clear
Description
Extension users can clear all the following features set on their own telephone at once:
Note
The features with "*" can be programmed not to be cancelled by this feature.
This feature is also known as Station Programme Clear.
Conditions
• Extension Dial Lock (→ 1.9.3 Extension Dial Lock) and the extension personal identification number
(PIN) (→ 1.28.1 Extension Personal Identification Number (PIN)) will not be cleared by this feature.
• For Users in Canada only
If dial tone 2 is heard after Extension Feature Clear:
After performing Extension Feature Clear, Call Waiting will be enabled if "Extension Clear: Call
Waiting" is set to "Clear" through system programming. In this case, dial tone 2 will be heard when
going off-hook. (→ 1.29.1 Dial Tone)
Programming Manual References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Features—Extension Feature Clear
2.8.17 [2-9] System Options—Option 2
→Extension Clear—Call Waiting
→Extension Clear—Fwd/DND
Features After Setting
Absent Message Off
BGM Off
FWD*/DND* Off
Call Pickup Deny Allow
Call Waiting* Disable (In Canada, the default setting is "Enable" [Call
Waiting tone].)
Data Line Security Off
Executive Busy Override Deny Allow
Log-in/Log-out Log-in
Message Waiting All messages left by other extensions will be cleared.
Paging Deny Allow
Parallelled Telephone Paired SLT will ring.
Hot Line* Off
Timed Reminder Cleared
To Next Page
Loading...
