1.8 Busy Line/Busy Party Features
126 Feature Guide
1.8.3 Call Monitor
Description
Allows an extension user to listen to a busy extension user's existing conversation. The user can hear the
conversation, but the user's voice is not heard. If desired, interrupting the call to establish a three-party
conference call is available.
Conditions
• COS programming determines extension users who can use this feature.
• This feature is available only when the busy extension is in a conversation with another extension or
outside party.
• This feature does not work when the busy extension is in one of the following conditions:
a) Executive Busy Override Deny (→ 1.8.2 Executive Busy Override) or Data Line Security (→ 1.11.5
Data Line Security) has been set.
b) While receiving OHCA (→ 1.8.4.3 Off-hook Call Announcement (OHCA)) or Whisper OHCA (→
1.8.4.4 Whisper OHCA).
c) During a Conference call (→ 1.14.1 Conference Features).
d) During a doorphone call (→ 1.17.1 Doorphone Call).
e) While Live Call Screening (LCS) or Two-way Record is activated (→ 1.24.3 Voice Mail DPT (Digital)
Integration).
f) During Consultation Hold.
• This feature stops when the busy extension user presses the following buttons during a conversation
(→ 1.20.1 Fixed Buttons and 1.20.2 Flexible Buttons):
– FLASH/RECALL button
– HOLD button
– TRANSFER button
– CONF (Conference) button
–DSS button
– EFA button
– Two-way Record button
– Two-way Transfer button
– One-touch Two-way Transfer button
– Voice Mail (VM) Transfer button
Programming Manual References
PC Programming Manual
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Call Monitor
2.8.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Call Monitor
2.10.1 [4-1-1] Wired Extension—Extension Settings
→Option 2—Data Mode
→Option 3—Executive Override Deny
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 3—Executive Override Deny
PT Programming Manual
To Next Page
Loading...
