1.12 Transferring Features
174 Feature Guide
• One-touch Transfer
One-touch Transfer can be performed by pressing a One-touch Dialling button that has been assigned
the TRANSFER command and the telephone number of the transfer destination. This is useful for
transferring calls to an outside destination. (→1.6.1 Memory Dialling Features)
• Automatic Transfer by SDN Button or DSS Button
Pressing an SDN button or DSS button during a conversation with an extension or outside party can
automatically transfer the call to the specified destination (→ 1.7.1 Primary Directory Number (PDN)/
Secondary Directory Number (SDN) Extension). It is possible through system programming to prevent
this feature from operating for extension to extension calls.
• When transferring a call from an analogue trunk, users are strongly recommended to perform a
screened transfer, so that the outside caller is not automatically connected to an extension using
Hands-free Answerback when the extension user is absent.
Programming Manual References
PC Programming Manual
2.8.3 [2-2] Operator & BGM—BGM and Music on Hold—Sound on Transfer
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Recall—Transfer Recall
2.8.11 [2-7-1] Class of Service—COS Settings—TRS—Transfer to CO
2.8.17 [2-9] System Options—Option 4
→ DSS Key—Automatic Transfer for Extension Call
→ Transfer—Transfer to Busy Extension without BSS Operation
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Transfer Recall Destination
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—Transfer Recall Destination
PT Programming Manual
[201] Transfer Recall Time
[503] Call Transfer to Trunk
[712] Music for Transfer
Feature Guide References
2.2.1 Class of Service (COS)
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
Destination Availability
To Next Page
Loading...
