Panasonic KX-TDA30

1.1 Incoming Call Features
Feature Guide 21
Note
Tenant number and VPS trunk group number can also be assigned in the DIL table. Tenant number is
used to determine the time mode (day/lunch/break/night) for the corresponding trunk. VPS trunk group
number is used in Voice Mail DPT (Digital) Integration.
Explanation:
If a trunk call is received from trunk 01;
In Day mode
: CLI is enabled. Route to CLI destination.
In Lunch mode
: CLI is disabled. Route to DIL destination, extension 100.
Programming Manual References
PC Programming Manual
2.16.2 [10-2] DIL Table & Port Settings—DIL
→ DIL Destination—Day, Lunch, Break, Night
→ Tenant Number
→ VM Trunk Group
PT Programming Manual
[421] BRI DIL/DDI/MSN Selection
[450] DIL 1:1 Destination
Feature Guide References
1.1.1.5 Calling Line Identification (CLI) Distribution
2.2.3 Tenant Service
2.2.4 Time Service
3.1 Capacity of System Resources
*
:
→ 2.16.2 [10-2] DIL Table & Port Settings—DIL—DIL Destination—Day, Lunch, Break, Night
→ [450] DIL 1:1 Destination