Panasonic KX-TDA30

1.1 Incoming Call Features
Feature Guide 23
[Programming Example of DID/DDI Table]
DDI can be programmed as DID.
Note
Tenant number and VPS trunk group number can also be assigned in the DID/DDI table. Tenant number
is used to determine the time mode (day/lunch/break/night) for the corresponding DID/DDI number.
VPS trunk group number is used in Voice Mail DPT (Digital) Integration (→ 1.24.3 Voice Mail DPT
(Digital) Integration).
Explanation:
If the DID/DDI number is "123-4567":
1. Checks the number in the table.
→ Matches the number in location 0001.
2. Checks the time mode.
In Day mode:
CLI is enabled. Route to CLI destination.
In Lunch mode:
CLI is disabled. Route to DID/DDI destination, extension 100.
Conditions
• To use this feature, DID/DDI service must be assigned as the distribution method for a trunk port.
• DID/DDI Number Modification
It is possible to modify a received DID/DDI number, which may be convenient when programming the
DID/DDI table. The modification method (removed number of digits/added number) can be
programmed on a trunk port basis.
[Modification Example]
Location
No.
*1
Name
*2
CLI
*3
Destination
*4
Day Lunch ... Day Lunch ...
0001 123-4567 John White Enable Disable ... 105 100 ...
0002 123-2468 Tom Smith Enable Disable ... 102 100 ...
0003 123-456 A company Enable Disable ... 101 101 ...
:::: :::::
*1
:
→ 2.16.3 [10-3] DDI / DID Table—DDI / DID Number
→ [451] DID Number
*2
:
→ 2.16.3 [10-3] DDI / DID Table—DDI / DID Name
→ [452] DID Name
*3
:
→ 2.16.3 [10-3] DDI / DID Table—CLI Ring for DDI/DID—Day, Lunch, Break, Night
*4
:
→ 2.16.3 [10-3] DDI / DID Table—DDI / DID Destination—Day, Lunch, Break, Night
→ [453] DID Destination
Removed number of digits: 6
Added number: 10
Received DID/DDI number: 87654321
Modified DID/DDI number: 876543 21 = 1021
1) Remove the
first 6 digits.
2) Add "10".