1.21 Integrated Services Digital Network (ISDN) Service Features
Feature Guide 253
– L2 Data Link Mode
– Access Mode (Point-to-Point/Point-to-Multipoint)
– TEI Assignment Mode (Fix 00–63/Automatic)
Programming Manual References
PC Programming Manual
2.4.2 Tool—BRI Automatic Configuration
2.7.13 [1-1] Slot—BRI/PRI Card Property
2.7.14 [1-1] Slot—BRI Port
2.7.15 [1-1] Slot—BRI Port—Port Command
2.7.16 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.7.17 [1-1] Slot—PRI Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Extension Inter-digit
2.8.17 [2-9] System Options—Option 2—ISDN en Bloc Dial—[#] as End of Dial for en Bloc mode
2.10.1 [4-1-1] Wired Extension—Extension Settings
→ Main—Extension Number
→ Option 6—ISDN Bearer
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 6—ISDN Bearer
2.12.8 [6-7] Dialling Plan—Auto Assign
PT Programming Manual
[420] BRI Network Type
[424] BRI Layer 1 Active Mode
[425] BRI Layer 2 Active Mode
[426] BRI Configuration
[427] BRI TEI Mode
Feature Guide References
1.30.4 QSIG Standard Features
To Next Page
Loading...
