Panasonic KX-TDA30 - Page 309

1.26 Administrative Information Features
Feature Guide 309
c) Word Length: A word length code indicates how many bits compose a character.
→ 2.17.1 [11-1] Main—RS-232C—Communication—Word Length
→ [800] RS-232C Parameter—Word Length
d) Parity Bit: A parity code indicates what type of parity is used to detect an error in the string of bits
composing a character. Make an appropriate selection depending on the requirements of the PC
or printer.
→ 2.17.1 [11-1] Main—RS-232C—Communication—Parity Bit
→ [800] RS-232C Parameter—Parity Bit
e) Stop Bit Length: A stop bit code indicates the end of a bit string which composes a character.
Select an appropriate value depending on the requirements of the PC or printer.
→ 2.17.1 [11-1] Main—RS-232C—Communication—Stop Bit
→ [800] RS-232C Parameter—Stop Bit Length
• If a call is transferred to an ICD group or PDN extension using Automatic Transfer, the condition code
"TR" will not be recorded on SMDR (→ 1.12.1 Call Transfer).
• Host PBX Access Code
The dialled number including the Host PBX Access code will be recorded on SMDR only if the modified
number setting is selected in the ARS setting for SMDR.
• When a Host PBX Access code is assigned to a trunk group, calls to extensions of the host PBX are
not recorded on SMDR.
• A Host PBX Access Code can be used to record only long distance calls on SMDR when a trunk port
is connected directly to the telephone company (not a host PBX). This is allowed when the long
distance code (e.g., “0”) is assigned as the Host PBX Access code. All local calls (e.g., calls that do not
require a “0” to be dialled first) are treated as extensions of the telephone company and do not get
recorded on SMDR, because in this case this PBX recognises the telephone company as the host PBX.
Therefore, only long distance calls are recorded on SMDR.
Installation Manual References
KX-TDA30
2.10.1 Connection of Peripherals
KX-TDA100/KX-TDA200
2.11.1 Connection of Peripherals
KX-TDA600
2.3.2 EMEC Card (KX-TDA6105)
2.13.1 Connection of Peripherals
Programming Manual References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Analogue CO Call Duration Start
2.8.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Outgoing CO Call Printout (SMDR)
2.12.9 [6-8] Hotel & Charge
→ Main—SMDR for External Hotel Application 2—Printing Message 1–8
→ Charge—Charge Options—Currency
2.17.1 [11-1] Main
→ SMDR
→ SMDR Options
→ RS-232C
PT Programming Manual