1.26 Administrative Information Features
314 Feature Guide
• It is possible to enable the PBX to send the flash/recall signal to the telephone company after a
conversation (in on-hook status) to receive the call charge information.
Programming Manual References
PC Programming Manual
2.7.10 [1-1] Slot—LCO Card Property
→Pay Tone—Pay Tone Frequency (KX-TDA100/KX-TDA200/KX-TDA600 only)
→Pay Tone—Sending Flash while end talk (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.9.3 [3-1-3] Trunk Group—Charge Rate
2.10.5 [4-1-4] Wired Extension—Flexible Button—Type
2.10.13 [4-2-3] Portable Station—Flexible Button—Type
2.10.17 [4-3] DSS Console—Flexible Button—Type
2.12.9 [6-8] Hotel & Charge—Charge
→Margin & Tax—Margin Rate for "Telephone" (%)
→Margin & Tax—Tax Rate for "Telephone" (%)
→Charge Options—Digits After Decimal Point
→Charge Options—Currency
→Charge Options—Currency Display Position
→Charge Options—Action at Charge Limit
→Charge Options—Meter Start on Answer Detection
PT Programming Manual
[010] Charge Margin
[011] Charge Tax
[012] Charge Rate per Unit
[130] Decimal Point Position for Currency
[131] Currency
[491] Pay Tone Signal Type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
1.9.6 Verification Code Entry
1.20.2 Flexible Buttons
3.1 Capacity of System Resources
User Manual References
1.11.1 Using the Telephones in a Hotel-type Environment (Hospitality Features)
3.2.2 Manager Programming
To Next Page
Loading...
