1.30 Networking Features
Feature Guide 359
Number to dial to call that extension using a public trunk:
9 (trunk access number) + 012-345-1011
If the call cannot be completed using the VoIP network, and the dialled leading number is found in the Quick
Dialling Table, the call will be automatically rerouted to a trunk as specified by the corresponding destination
number.
When a call is made using the VoIP network, if the PBX does not receive a reply from the other PBX within
about 4 seconds of making the call, or an error is returned, the call is rerouted to a public trunk as specified.
Conditions
• Some QSIG services are available. (→ 1.30.4 QSIG Standard Features)
• TRS/Call Barring settings apply to calls rerouted to public trunks.
Programming Manual References
PC Programming Manual
2.8.9 [2-6-2] Numbering Plan—Quick Dial—Use quick dial for rerouting to public CO when TIE line does not
work (MPR Software File Version 3.2000 or later)
PT Programming Manual
None
Feature Guide References
1.30.1 TIE Line Service
[Quick Dialling Table]
Quick Dialling No. Destination No.
720 9012345
To Next Page
Loading...
