2.3 System Data Control
Feature Guide 427
* It is possible to register Quick Dialling numbers that overlap with other registered numbers. This is
used for the Automatic Rerouting of VoIP Calls To Public Trunk feature.
2. Flexible Numbering (available while busy, DND, or ringback tone is heard)
Feature numbers which are available while busy, DND, or ringback tone is heard can be customised for
easy use. The numbers should be one digit ("0" through "9", " ", or "#") and must not conflict. For
default, refer to the following table:
Log-in/Log-out
736 736
736
Incoming Call Queue Monitor
739 739
739
Hot Line programme/set/cancel
740 740
740
Absent Message set/cancel
750 750
750
BGM set/cancel
751 751
751
Remote Wake-up Call
76 76 76
Timed Reminder set/cancel
760 760
760
Printing Message
761 761
761
Extension Dial Lock set/cancel
77 77
77
Time Service Switch
780 780
780
Remote Extension Dial Lock off
782 782
782
Remote Extension Dial Lock on
783 783
783
NDSS Monitor Release
784 784
784
Trunk Busy Out Clear
785 785
None
Extension Feature Clear
790 790
790
Extension Personal Identification Number
(PIN) set/cancel
799 799
799
Dial Information (CTI) None None None
Other PBX Extension Number (TIE) 1–16 None None None
Quick Dialling* None None None
Feature Default
Type 1
(with )
Type 2
(without )
KX-TDA30/
KX-TDA100/
KX-TDA200
KX-TDA600
To Next Page
Loading...
