Panasonic KX-TDA30

1.1 Incoming Call Features
44 Feature Guide
caller's telephone number can be received. The number will flash on the display for five seconds,
followed by a 10-second pause, then flash again for five seconds.
Note that the received caller information will not be displayed on telephones or wireless phones
connected to SLT ports.
Programming Manual References
PC Programming Manual
2.7.10 [1-1] Slot—LCO Card Property—Caller ID—Caller ID Signalling
2.8.8 [2-6-1] Numbering Plan—Main—Features
→ Call Waiting Mode: Manual Call Waiting for Extension Call
→ Call Waiting Mode: Automatic Call Waiting
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
→ BSS / OHCA / Whisper OHCA / DND Override
→ BSS / OHCA / Whisper OHCA / DND Override-2
2.8.17 [2-9] System Options—Option 5—Call Waiting—Automatic Call Waiting for Extension Call
2.10.1 [4-1-1] Wired Extension—Extension Settings
→ Option 2—Manual C. Waiting for Extension Call
→ Option 2—Automatic C. Waiting
→ Option 4—Call Waiting Tone Type
2.10.10 [4-2-1] Portable Station—Extension Settings
→ Option 2—Manual C. Waiting for Extension Call
→ Option 2—Automatic C. Waiting
→ Option 4—Call Waiting Tone Type
PT Programming Manual
None
Feature Guide References
1.8.4 Second Call Notification to Busy Extension
1.18.2 Incoming Call Log
1.26.1 Station Message Detail Recording (SMDR)
User Manual References
1.4.4 Answering Call Waiting
1.8.3 Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
3.1.2 Settings on the Programming Mode