Panasonic KX-TDA30

1.2 Receiving Group Features
Feature Guide 65
• If an ICD Group button is assigned, it also shows the log-in/log-out status of the corresponding group.
The light pattern is the same as the Log-in/Log-out button that includes the group number.
• Wrap-up Timer
– Two wrap-up timers can be programmed, an ICD Group member wrap-up timer and an extension
wrap-up timer. System programming selects which timer is used. When the ICD Group member
wrap-up timer is selected, the timer is only activated after calls to the extension through an ICD
Group. When the extension wrap-up timer is selected, the timer is activated after all calls to or from
the extension, including a retrieved call on hold.
– Only calls from ICD Groups cannot be received during the wrap-up time. Other calls are received
as normal.
– The wrap-up timer does not work for ISDN extensions or PS Ring Groups.
• Wrap-up Button
A flexible button can be customised as the Wrap-up button. It shows the current status as follows:
• When a PS in Wireless XDP Parallel Mode completes a call, neither the PS nor its wired telephone can
have Wrap-up time. (→ 1.25.5 Wireless XDP Parallel Mode)
• Automatic Log-out
A member extension may be logged out automatically, if the Unanswered time expires a
preprogrammed number of times consecutively. The number of consecutive unanswered calls can be
assigned for each incoming call distribution group. If the extension is a member of more than one
incoming call distribution group, the unanswered number is counted across all corresponding incoming
call distribution groups. It is possible to return to log-in mode manually.
The Automatic Log-out feature does not work for extensions in an incoming call distribution group using
the Ring distribution method (→ 1.2.2.2 Group Call Distribution).
• Log-in/Log-out Monitor
The supervisor extension can monitor and control the log-in/log-out status of the incoming call
distribution group members. (→ 1.2.2.8 Supervisory Feature)
• Log-in/Log-out Information on SMDR
Log-in/Log-out information can be printed out on SMDR. (→ 1.26.1 Station Message Detail Recording
(SMDR))
Programming Manual References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Features
→ Log-in / Log-out
→ Not Ready (Manual Wrap-up) Mode On / Off
(All)
Used to log in to or out of all incoming
call distribution groups to which the
extension user belongs.
After Log-out
Operation
After Log-in
Operation
Light pattern Status
Slow red flashing Wrap-up
Red on Not Ready
Off Ready (Wrap-up mode cancel)
Parameter Usage
Light Pattern
Red on Off