119
5. 4K Photo and Drive Settings
• The camera will perform burst recording of a 4K photo and save it as a 4K burst file with
a [Rec Format] setting of [MP4].
• Regardless of the [System Frequency] setting, 4K burst files are recorded at [4K/100M/
30p] and they can be played back on the camera.
• When [Auto Review] is enabled, the picture selection screen will be displayed
automatically. To continue recording, press the shutter button halfway to display the
recording screen.
• For information on how to select and save pictures from recorded 4K burst files, refer to
P121.
• To reduce camera shake, we recommend that you use a tripod and shutter remote
control (DMW-RSL1: optional) (P315) when using [Light Composition] (P245).
[]
[4K Pre-Burst]
Press the shutter button fully.
F Approximately 1 second
G Recording is performed
• Auto Focus adjusts focus
continuously, and except in Manual
Exposure Mode, it also adjusts
exposure continuously.
• Images may not appear as smooth as they do on the normal
recording screen.
• When [ ] ([4K Pre-Burst]) is set, the battery drains faster
and the camera temperature rises. Select [ ] ([4K
Pre-Burst]) only when recording.
Recording tips
In situations where you want to lock focus and exposure, such
as when the subject is not at the centre, use [AF/AE LOCK].
(P102)
• Motion picture file will be recorded and played back in separate files in the following cases.
(You can continue recording without interruption.)
– When using an SDHC memory card: If the file exceeds 4 GB
– When using an SDXC memory card: If the continuous recording time exceeds 3 hours and
4 minutes or If the file exceeds 96 GB
To Next Page
Loading...
Need help?
General
