82 VQT2R24 VQT2R24 83
Recording with face recognition function
[FACE RECOG.] (continued)
Recording mode:
Automatically register face pictures
You can set the camera so that the registration screen automatically displays after
recording a subject that is recorded many times.
Select [FACE RECOG.] form
[REC] menu (→20)
Select [SET]
Select [AUTO
REGISTRATION]
Select [ON]
Return to menu screen
●
In some cases it may be very difficult
to recognise faces that have only been
registered by automatic registration. From
[REC] menu’s [FACE RECOG.], register
face pictures in advance.
■
Register face pictures from the automatic registration screen
Select [YES] from the registration confirmation screen
• If face recognition is not registered, proceed to
.
• If [NO] is selected, a re-confirmation screen is
displayed.
If [YES] is selected here, [AUTO
REGISTRATION] is turned to [OFF].
Select [NEW PERSON] or [ADDITIONAL IMAGE]
Item About settings
[NEW
PERSON]
If 6 people are already registered, select a person to replace.
[ADDITIONAL
IMAGE]
Select the person for which you are registering additional face
pictures
• If 3 face pictures are already registered, select a picture to
replace.
Select the item to edit and make the setting (Step ) (→80)
●
The guide for the registration screen to be displayed is 3 times (estimate). (This does
not occur in [BURST], [AUDIO REC.], [AUTO BRACKET] or [MULTI ASPECT].)
●
If the registration screen is not displayed easily, recording in the same environment and
with the same expression will make it display more easily.
●
If a face is not recognised despite being registered, re-registering the person from
[REC] menu’s [FACE RECOG.] at that location will make it easier for the camera to
recognise the person.
●
If the registration screen is displayed for a person already registered, making additional
registration of the person in that status will make it easier for the camera to recognise
the person.
●
If a picture recorded with a flash is registered, it may be difficult for the camera to
recognise the person.
●
When [AUTO REGISTRATION] is set to [ON], the [FACE RECOG.] setting is also
switched to [ON ] automatically.
Setting recognition sensitivity
The sensitivity of the camera can be set if it is having difficulty with face recognition or
making mistakes.
Select [FACE RECOG.] from
[REC] menu (→20)
Select [SET]
Select [SENSITIVITY]
Select sensitivity
[HIGH]: Set when camera
is having difficulty
recognizing faces
[STANDARD]: The usual setting
[LOW]: Set when the camera
frequently recognises
a face as that of a
different person
Return to menu screen
●
Setting [SENSITIVITY] at [HIGH] makes it easier for the camera to recognise faces but
also increases the possibility of recognizing the face as that of a different person.
To Next Page
Loading...
