To Next PageTo Next PageWhy does the UV lamp light when the outer door is open on Panasonic MCO-170AICUVH Accessories?
If the UV lamp lights when the outer door is open on your Panasonic accessories, check if something is pushing the door switch.
General| Brand | Panasonic |
|---|---|
| Model | MCO-170AICUVH Series |
| Category | Accessories |
| Language | English |
Defines the equipment's design purpose and provides essential precautions for its use.
Explains the meaning of warning symbols and general safety guidelines for operation.
Details the warning label for high-voltage electrical components and requirements for servicing.
Lists critical safety measures related to electrical connections, grounding, and handling.
Covers precautions for preventing fire, explosion, injury, and safe handling of the unit.
Outlines safety precautions for H2O2 decontamination, including reagent handling and ventilation.
Describes various warning labels on the incubator, explaining potential dangers and required actions.
Explains the meaning and purpose of symbols found on the incubator for user safety.
Specifies acceptable indoor use conditions, altitude, temperature, humidity, and voltage fluctuations.
Identifies key external components of the incubator unit from different views.
Provides detailed descriptions for each numbered component of the incubator.
Explains the main display elements of the LCD touch panel when the power is turned on.
Details the specific fields and indicators shown on the LCD touch panel's top screen.
Describes the function of various keys available on the LCD touch panel interface.
Explains the remote alarm terminal's purpose, connection, and behavior with the buzzer key.
Details the necessary environmental and physical site conditions for incubator installation.
Covers requirements for weight support, floor stability, and environmental hazards during installation.
Outlines the step-by-step process for installing the incubator and its internal components.
Explains grounding, ground fault circuit breakers, and precautions for moving the unit.
Details procedures for double stacking incubators and preparing the unit for storage.
Provides a detailed procedure for cleaning the incubator's interior and components before first use.
Explains how to safely remove internal components for cleaning or maintenance.
Details the correct procedure for reinstalling inner components after cleaning.
Guides the user on how to properly fill the humidifying pan with water.
Offers critical advice for maintaining optimal conditions and preventing issues during cell cultivation.
Provides guidelines on selecting the installation site and maintaining cleanliness to prevent contamination.
Details the steps required to start the incubator for trial or actual operation.
Explains how to navigate through the menu options on the LCD touch panel.
Maps menu selections to specific functions and their corresponding page references.
Describes how to operate specific functions directly from the touch panel without using the main menu.
Explains how to use the numerical input window on the LCD touch panel for setting values.
Details the procedure for setting the chamber's temperature, CO2 density, and high limit alarm.
Provides specific ranges and factory settings for temperature, CO2 density, and high limit alarm.
Explains how to enable and set a password for the key lock function.
Describes how to operate the key lock function, including password entry and potential issues.
Details the procedure for disabling the key lock function and returning to the menu screen.
Guides setting automatic temperature and CO2 density alarms and their parameters.
Details configuration for alarm delay, door delay, ring back, and remote alarm settings.
Explains how the buzzer behaves during an alarm state and how to manage it.
Describes how to set the interval for saving operation and alarm log data.
Guides the user on how to view the saved operation log data graphically on the LCD.
Explains how to input dates and select specific data types for graphical display of operation logs.
Details how to view the graphical logs for chamber temperature and CO2 density.
Provides instructions on exporting operation log data to a USB memory device.
Explains how to select the time period and data types for exporting operation logs.
Covers the final steps of exporting operation logs, including confirmation and USB removal.
Guides the user on how to display saved alarm log data graphically on the LCD.
Explains how to view alarm logs for specified periods and how to export them.
Provides instructions on exporting alarm log data to a USB memory device.
Explains how to select the period and handle cases of no data or disconnected USB for alarm logs.
Details the procedure for setting the incubator's date and time.
Explains how to adjust the LCD panel's brightness and configure the sleep function.
Provides specific details on active and sleep brightness, and the sleep function operation.
Guides on setting parameters for the optional Data Acquisition System (DAQ).
Explains the purpose and basic operation of the UV lamp for disinfection.
Covers safety warnings for UV light and information on UV lamp replacement and lifespan.
Details the procedure for changing the UV lamp's ON period and related settings.
Explains specific UV settings like timer, life, timer extension, and frequency.
Provides instructions for operating the UV lamp in a 24-hour mode for deep decontamination.
Details the completion of the 24-hour UV mode and reinstallation of components.
Outlines essential precautions and conditions for performing H2O2 decontamination.
Details initial H2O2 decontamination steps, including component removal and generator setup.
Continues H2O2 decontamination steps, including system checks and starting the cycle.
Describes key stages: warming, vapor generation, and UV resolve during H2O2 decontamination.
Covers final steps of H2O2 decontamination, including cleanup and reassembly.
Provides detailed handling, storage, and disposal precautions for the H2O2 reagent.
Explains how to use the unlock key, especially during power interruptions.
Guides on setting the auto-lock function for the outer door based on time after closing.
Details how to unlock the outer door, particularly when the electric lock is engaged.
Explains how to disable the auto-lock function for the electric lock.
Guides the connection of two CO2 gas cylinders for the auto changer system.
Explains the process and indicators for automatic switching between CO2 gas cylinders.
Details various situations and their corresponding display messages for automatic CO2 gas cylinder changeover.
Describes how to manually change the CO2 gas supply line between cylinders.
Guides the connection of a standard gas cylinder for CO2 density calibration.
Explains how to input the CO2 density of the connected standard gas cylinder.
Details the steps for performing the CO2 density calibration using the STD gas kit.
Outlines the routine monthly procedure for cleaning the incubator and its components.
Lists alarms, their conditions, display messages, buzzer, and safety operations.
Details alarms related to UV lamp, communication, and buzzer/remote alarm behavior.
Covers alarms and safety functions for H2O2 decontamination and STD gas calibration.
Provides troubleshooting steps for when the incubator does not operate or an alarm is active.
Offers solutions for problems related to temperature, humidity, CO2 density, and UV lamp operation.
Lists common issues and countermeasures for H2O2 decontamination failures.
Provides critical safety warnings and procedures for qualified personnel to dismantle and dispose of the unit.
Explains recycling symbols and guidelines applicable to EU countries for electrical and electronic equipment.
Presents disposal and recycling information in French, Spanish, Portuguese, and Italian.
Continues disposal and recycling information in Dutch and Swedish.
Lists the primary technical specifications for the CO2 incubator models.
Details optional accessories available for the CO2 incubator models.
Organizes optional accessories by function and lists required plates for double stacking.
Provides key performance metrics like temperature/CO2 control, humidity, and noise level.
A checklist for service engineers to ensure unit safety and record contamination status before work.
