10
Safety Precautions
Important
CAUTION
Do not hold the cables or motor
shaft when transporting the motor.
The failure could result in
injuries.
Do not block the heat dissipation
hole.
The failure could result in
electric shocks, or fire.
Never start and stop the motor by
magnet contactor which is provide on
the main line.
The failure could result in
damages.
Do not climb or stand on the servo
equipment.
The failure could result in
electric shocks, injuries,
damages, or malfunction.
Do not give hard
pressure to the shaft.
The failure
could result
in damages.
Do not turn on or off the power
frequently.
The failure could result in
damages.
Do not shock the driver and the motor.
The failure could result in
damages.
Avoid excessive gain adjustments, changes,
or unstable operation of the product.
The failure could result in
injuries.
Do not use the motor internal brake
for the purpose of controlling speed
of load.
The failure could result in
injuries, or damages.
Do not approach to the equipment
after recovery from the power failure
because they may restart suddenly.
Execute the personal safety setting
on the Equipment after the restart.
The failure could result in
injuries.
Do not modify, dismantle or repair
the product.
The failure could result in
electric shocks, injuries, or
fire.
Do not pull the motor cable by too
much power.
The failure could result in
damages.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
